05-06-2018 06:28 PM
by BenhamDesign |
63 comments »
This custom staircase and handrail is made from Hickory and stained to go with the wood flooring that was installed at the top of the stairs. The Craftsman style design was derived from some of the architecture in the house.
you can watch it be fabricated or read about it below
Recount of the video
Today, I’m building a staircase with a custom handrail.But before we get to the build, let me get you up to speed about what needed to be done on the jobsite before we could install the st...
Read this entry »
12-06-2011 08:48 PM
by BillyJ |
2 comments »
I was able to move both the light and construct the arches in two nights. It would have been much easier incorporating the arches into the original design, however, I found it was not all that horrible building off site.
Laying everything out on a 1/4 OSB board, I drew a 70 5/8” circle. Allowing for the 1/4 drywall, I cut and assembled the two sides. After that, it was glue, screw, block, glue, screw, and finish.
I find using the 3M #61 spray to hold the molding is a lot easie...
Read this entry »
