I finally got the 2” X 6” for the balusters.
Photos by Barb.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It took approximately 10 minutes to cut out a baluster, Then I rounded all of the corner with a 1/2” radius bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Piled up ready to apply.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First one!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I changed the spacing of them to about 3”,because 6” didn’t look right.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Looking through the baluster pattern is pleasing to the eye.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Balusters all on!
To be continued!
-- ** Dick, & Barb Cain *************** http://lumberjocks.com/jocks/Chipncut
2 comments so far
Bill
home | projects | blog
131 posts in 5475 days
posted 07-14-2008 05:07 PM
The deck is coming along nicely. Are you planning on painting it, staining, or letting it weather naturally?
-- Bill - Turlock, Ca. - http://www.brookswoodworks.com
Dick, & Barb Cain
home | projects | blog
121 posts in 5484 days
posted 07-14-2008 05:58 PM
We already used a semi-transparent stain.
I’m about to pick out some images for the next blog series.
-- ** Dick, & Barb Cain *************** http://lumberjocks.com/jocks/Chipncut