Project by JMG | posted 07-05-2009 12:51 AM | 3506 views | 0 times favorited | 4 comments | ![]() |
![]() |
This is a 20’x20’ platform style composite deck I built in the summerof 08’. The homeowner chose the redwood color from Veranda. The picture only shows a piece of it including the 4’x7’ platform leading up to the pool. The deck is only about 6” off the ground so the homeowner and I agreed to go without the handrail. In the end, the deck turned out rather nice.
-- Jon
4 comments so far
BTKS
home | projects | blog
39 posts in 5214 days
posted 07-05-2009 04:20 PM
Nice clean lines. I like the border strip around all the edges, much nicer detail than board ends. Good job. BTKS
JMG
home | projects | blog
4 posts in 5200 days
posted 07-07-2009 06:05 AM
Thanks for the comment BTKS, I build all my decks with a picture frame around them. Just add a double joist on the ends where the border runs parallel with the joists. That way, half of the double will catch the decking and the other half will catch the board around the edge.
-- Jon
BH
home | projects | blog
41 posts in 5218 days
posted 07-07-2009 03:13 PM
Great job Jon. I agree, the picture frame looks great and really makes the deck. Any preference on a composite type? I’m looking to redo a deck but having a hard time deciding on the composite (Trex, Timber Tech, Fiberon…)
BillyJ
home | projects | blog
253 posts in 5154 days
posted 08-24-2009 04:03 AM
Nice deck. I’ve used Veranda before, I like it too.
-- No matter how many times I measure, I always forget the dimensions before I cut.