Project by Mike | posted 10-07-2009 08:12 PM | 1887 views | 0 times favorited | 2 comments | ![]() |
![]() |
This roof was a leaking EPDM 40 mil that was installed wrong. The customer wanted us to put a coating on it.
1. Clean the roof by resurewash
2. Clothed every seam and drains
3. Applied a red primer
4. Applied the base coat
5. Then the reflective finished coat was applied.
This project saved the building owner about $4.00 per square foot and gave him additional savings on their cooling bill for the building through reflective heat.
-- Mike, Tennessee, www.myproselect.com
2 comments so far
a1Jim
home | projects | blog
160 posts in 4118 days
posted 10-08-2009 01:25 AM
Is EPDM torch down roofing?
-- a-1contractor.com
cathyA
home | projects | blog
119 posts in 202 days
posted 11-10-2020 02:21 AM
Here we can see the images of this roof coating that was installed garage spring repair Hermosa Beach recently because of the roof leakage. We can see the coating here in this image and the specifications are mentioned here very clearly. I am looking here for more updates and to keep up the good work.