HomeRefurbers

GTTV: HomeRefurbers Videos

This is the list of all blog entries tagged with 'video'.

View Todd A. Clippinger's profile

Tips For Handling And Transporting Projects

02-24-2013 05:24 PM by Todd A. Clippinger | 18 comments »

In this video I share some tips and suggestions as I show how I handle and transport some of my projects without damaging them. Everybody’s needs are different, but I hope that sharing these tips will help inspire solutions for your needs when handling & transporting projects. Your frie...

Watch this video »

View Todd A. Clippinger's profile

Video Quick Tip On Clamping

02-13-2013 07:39 PM by Todd A. Clippinger | 3 comments »

I ran into a situation where my clamping needs exceeded my clamp capacities. I did a quick video to share my solution because it might help someone else in their shop. I hope you find it helpful. Your friend in the shop, Todd A. Clippinger Share the Love ~ Share the Knowledge

Watch this video »

View Todd A. Clippinger's profile

Melamine Part 2: Apply Edge Banding

01-30-2013 04:52 AM by Todd A. Clippinger | 5 comments »

I just finished up the video for applying edge banding to melamine. This video follows Part 1 on how to get clean cuts in melamine, which can be quite a challenge without the right blade and techniques. Once the melamine is cut, often it will need to have edge banding applied. So I cover this top...

Watch this video »

View Mark's profile

Removing Carpeting - Prepping for Hardwood

01-21-2013 05:00 AM by Mark | 11 comments »

Attached is a video I shot this weekend while tearing out carpeting as part of my ongoing dining room renovation – essentially to make way for the hardwood floor I’ll be installing in the coming month or so. I tried to turn this into a tutorial video in case you haven’t done thi...

Watch this video »

View Mark's profile

Using Deck and Landscape Design Software

01-04-2013 04:21 AM by Mark | 44 comments »

Hi All - The attached video may be of interest to some of you thinking about a deck or landscape design project; I captured it from my PC some months back showing how I use a design software package to take much of the risk out of expensive & elaborate projects like this. I thought I’...

Watch this video »

View MarkTheFiddler's profile

An Upholstery Primer #5: Stuffing Seat Cushions

11-04-2012 01:32 AM by MarkTheFiddler | 57 comments »

It’s a video blog. No scripting. Hope it helps! Cutting the foamWrapping the foamStuff IT! Mark

Watch this video »

View MarkTheFiddler's profile

An Upholstery Primer #4: Make a throw pillow

11-02-2012 04:28 AM by MarkTheFiddler | 70 comments »

Hey Refurbers, Sorry for skipping ahead but I have long since upholstered the couch I was stripping in the other post. I didn’t have a camera crew available (my 11 year old daughter) and I needed both hands for the work. You knew There was some sewing invloved in upholstery. I figured...

Watch this video »

View Dan Lyke's profile

A Shop for Dan #11: Lifting the soil

05-30-2012 04:50 PM by Dan Lyke | 6 comments »

It’s been a while since my last update here, but work hasn’t stopped that much. I did get employed, which sucks, but you know, cash flow and all that. Anyway, I was kinda stalled out so I called in a “final” inspection on my two permits on the shop, got sign-off on the ...

Watch this video »

View Dan Lyke's profile

Re-Plumbing #2: Holes in the walls, but the water flows

05-17-2012 07:20 PM by Dan Lyke | 3 comments »

So we got the plumbing in. Most of it done in a weekend, and it would have gone faster if I’d just sucked it up and bought a Sawzall and started pulling out the old plumbing with that, first. I settled on the Upinor ProPEX system because all of my contractor and handyman friends said ...

Watch this video »

View Todd A. Clippinger's profile

Getting Clean Cuts In Melamine

05-09-2012 03:55 AM by Todd A. Clippinger | 13 comments »

Melamine is great for making shelves or perhaps utility cabinets. But getting a cut without a lot of chipping can be a challenge. In this video I share my tools and techniques for creating clean cuts on both sides of melamine. The blade I use in the video is a triple chip Freud LU97R010. It ma...

Watch this video »

1 2 3 4 5 6
54 videos


DISCLAIMER: All views and comments posted by members are not necessarily those of HomeRefurbers.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

LumberJocks.com :: woodworking showcase